Ram Stress Test Pro2™
RAM Testing, Validation and More….
Clara, Calif. -- Ultra-X, the leading developer
of specialized PC diagnostic hardware and
software products for computer professionals,
announces the release of RAM Stress Test.
The product will be released during Fall Comdex
in Las Vegas, Nevada.
Stress Test Professional II (RST Pro2) is
a memory testing hardware/firmware designed
for rigorous testing needs of memory and system
manufacturers, design engineers, and service
professionals. R.S.T. Pro2 is a Self Booting,
Operating System Independent memory diagnostic
card for exercising and validating RAM in
Intel Pentium™, Cyrix/VIA processors,
AMD Athlon™ XP, AMD Athlon MP and the
upcoming AMD Opteron™ and AMD Athlon
processors based on AMD’s Hammer technology.
can select from over 30 proprietary algorithms
to test up to 64 Gigabyte of RAM. RST Pro2
supports all SIMMs, DIMMs, RIMMs,(SDRAM 66-133,
DDR, DDR II, RDRAM(RAMBus), SRAM, ECC, Parity
and Non-Parity) and others. A major advantage
of RST Pro2, compared to stand alone testers,
is the capability of testing and validating
RAM with-in the system environment. Now with
on-board memory, RST Pro2 is able to test
memory starting at memory address 2k. The
on-board RAM allows the RST Pro 2 to test
the maximum amount of memory seamlessly.
The card will store up to 100 failures and
provide a report at the end of the testing
cycle. You can also use the on-board serial
port to route the unlimited test results to
a remote system using HyperTerminal or similar
PRO 2 has the ability to monitor system power
supply voltages and temperature. The voltages
are tested to within 5% fluctuations. This
is a very easy way of detecting fatal power
supply failures. The power supply voltage
readings are monitored remotely using the
on-board serial port.
Pro2 is also equipped with optional temperature
sensing probes. These probes can be placed
anywhere on the system. They are ideal for
probing temperature at specific points on
the system board. The real time temperature
readings are routed through the serial port.
The temperature is measured in Fahrenheit
and Celsius scales simultaneously.
To receive more information contact us at
Ultra-X Inc. at, 1765 Scott Blvd., Suite #101,
Santa Clara, CA 95050 USA. 1-909-946-8321
CA., 1-888-722-3734, Fax 1-909-946-7639, E-mail
Stress Test PRO2 is a trademark of Ultra-X,
Inc. All rights reserved
All information contained in Ultra-X press
releases is accurate and valid as of the date
of issue. All content is subject to change.
For the latest information about Ultra-X,
Inc. and Ultra-X products, please contact
the appropriate PR contact.